Colorado 4WD V8-5.3L (2010)
Body / Frame Mount Bushing: Service and Repair
Drivetrain and Front Suspension Frame Insulator Replacement
Removal Procedure
Support the frame with the hoist when you change the body mounts. If only one mount is changed, loosen and lower the entire side on which the mount
in question is being replaced.
1. Raise the vehicle on a hoist. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Description and Operation).
2. Use jack stands or the equivalent to support the body where the mounts will be replaced.
3. Remove the bolt/cushion assembly at the number 1 and the number 2 body mount.
4. Remove the bolt/cushion assembly at the number 3 body mount, short wheel base vehicles.
5. Remove the bolt/cushion assembly at the number 3 and the number 4 body mount, long wheel base vehicles.