Colorado 4WD V8-5.3L (2010)
Jack Stowage Cover Replacement
Jack Stowage Cover Replacement
Removal Procedure
1. Remove the screw securing the jack cover to the jack stowage bracket.
2. Remove the jack cover by lifting up to release the tab from behind the jack stowage bracket.
Installation Procedure
1. Position the jack cover over the jack stowage bracket ensuring that the tab on the rear of the cover hooks behind the top of the jack stowage
bracket.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).