chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Driver or Passenger Seat Head Restraint Replacement|Page 10482 > < Sunroof / Moonroof Weatherstrip|Service and Repair|Page 10476
Page 1
background image

Head Rest: Service and Repair
Driver or Passenger Seat Head Restraint Replacement

Driver or Passenger Seat Head Restraint Replacement

Removal Procedure

1. Raise the head restraint to the full up position by pressing the release tab (2), and by lifting up the head restraint.
2. Insert a small tool into the head restraint retainer port (1).
3. In order to release the head restraint retainer, simultaneously lift up on the head restraint while applying inward pressure to the tool in the retainer

release port (1).

4. Remove the head restraint from the seat assembly.

Installation Procedure

1. Position the head restraint to the seat assembly.
2. Verify that the notches in the head restraint posts are indexed toward the rear of the seat assembly.
3. Push the head restraint downward into the fully installed position.
4. Raise the head restraint to the full up position. Verify that the head restraint retainer prevents the head restraint from being removed from the seat

assembly.

Driver or Passenger Seat Head Restraint Replacement|Page 10482 > < Sunroof / Moonroof Weatherstrip|Service and Repair|Page 10476