Colorado 4WD V8-5.3L (2010)
7. Pull the seat cover (1) over the seat back pad (3).
8. Press the seat cover hook and loop retaining strips (2) together by firmly running your hand over the seat back cover (1).
9. Install the J-strip (1) across the bottom of the seat back cover.
10. Install the head restraint. Refer to Driver or Passenger Seat Head Restraint Replacement (See: Head Rest/Service and Repair/Driver or Passenger
Seat Head Restraint Replacement).
11. Install the seat cushion outer trim panel. Refer to Seat Cushion Outer Trim Panel Replacement (See: Seat Cushion/Service and Repair/Seat
Cushion Outer Trim Panel Replacement).
12. Install the seat back release handle. Refer to EZ Entry Seat Manual Release Knob Replacement (See: Service and Repair/EZ Entry Seat Manual
Release Knob Replacement).
13. Install the seat in the vehicle. Refer to Split Bench Seat Replacement (See: Service and Repair/Split Bench Seat Replacement) or Front Seat
Replacement - Bucket (See: Service and Repair/Front Seat Replacement - Bucket).
