Colorado 4WD V8-5.3L (2010)
3. Install the seat cushion foam pad and cover to the frame.
4. Install the seat belt buckle assembly (1) through the seat cushion pad.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
5. Install the seat belt buckle assembly (1) to the seat adjuster with the bolt (2).
Tighten the front seat belt buckle bolt to 55 Nm (41 lb ft).
6. Connect the seat belt buckle electrical connector (1).
7. Install any clips or straps securing the electrical harness to the bottom of the seat cushion frame.
8. Position the seat back assembly on the seat cushion assembly.
