Colorado 4WD V8-5.3L (2010)
5. Remove the master cylinder reservoir seals (1).
Installation Procedure
1. Lightly lubricate the master cylinder reservoir seals with GM approved brake fluid from a clean, sealed brake fluid container.
2. Install the master cylinder reservoir seals (1).
Note: Ensure the 4 locking legs of the master cylinder reservoir fully engage the master cylinder.
3. Install the master cylinder reservoir (1) to the master cylinder.
4. Connect the brake fluid level indicator switch electrical connector.
5. Fill the master cylinder reservoir. Refer to Master Cylinder Reservoir Filling (See: Procedures/Master Cylinder Reservoir Filling).
Master Cylinder Replacement