Colorado 4WD V8-5.3L (2010)
1. Install the heater inlet front hose (7).
2. Reposition the heater inlet front hose clamp (6) using the J 38185 - pliers and install the heater inlet front hose to the heater inlet pipe.
3. Reposition the heater inlet front hose clamp (8) using the J 38185 - pliers and install the heater inlet front hose to engine.
4. Install the generator. Refer to Generator Replacement (LLV/LLR) (See: Starting and Charging/Charging System/Alternator/Service and
Repair/Generator Replacement)Generator Replacement (LH8) (See: Starting and Charging/Charging System/Alternator/Service and
Repair/Generator Replacement).
5. Fill the cooling system. Refer to Cooling System Draining and Filling (Static Fill) (See: Service and Repair/Cooling System Draining and Filling
(Static Fill)) Cooling System Draining and Filling (Vac N Fill) (See: Service and Repair/Cooling System Draining and Filling (Vac N Fill)).