chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Oil Pressure Sensor > < Oil Pan, Engine|Specifications|Page 1861
Page 7
background image

12. Install the starter. Refer to Starter Replacement (LLV/LLR)   (See: Starting and Charging/Starting System/Starter Motor/Service and Repair)

Starter Replacement (LH8)   (See: Starting and Charging/Starting System/Starter Motor/Service and Repair).

13. Install the inner axle shaft. Refer to Front Drive Axle Inner Shaft and Inner Shaft Housing Replacement   ().
14. Install the transmission oil cooler line retaining bracket (4) and bolt (3) and tighten to 9 Nm (80 lb in).
15. Install the transmission oil cooler lines (1) to the retainer (2).
16. Install the oil level indicator tube. Refer to Oil Level Indicator Tube Replacement   (See: Engine Oil Dip Stick - Dip Stick Tube/Service and

Repair).

17. Fill the engine with oil. Refer to Engine Oil and Oil Filter Replacement   (See: Engine Oil/Service and Repair).
18. Install the front differential, if equipped. Refer to Differential Carrier Assembly Replacement   (See: Transmission and Drivetrain/Differential

Assembly/Differential Carrier/Service and Repair).

19. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection   (See: Starting and Charging/Battery/Battery

Cable/Negative/Service and Repair/Battery Negative Cable Disconnection and Connection).

Oil Pressure Sensor > < Oil Pan, Engine|Specifications|Page 1861