Colorado 4WD V8-5.3L (2010)
1. Install the recirculation actuator (2).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the screws to the recirculation actuator. Tighten the screws to 1.9 Nm (17 lb ft).
3. Connect the electrical connector (3) to the recirculation actuator (2).
4. Install the HVAC module assembly. Refer to Air Conditioning and Heater Module Assembly Removal and Installation (See: Housing Assembly
HVAC/Service and Repair).
