Colorado 4WD V8-5.3L (2010)
Installation Procedure
1. Install the mode cable (3).
Make certain that the cable is properly seated in the notches in the HVAC control assembly (6).
2. Install the mode cable (3) to the HVAC control assembly (6).
3. Install the mode cable to the retaining clip.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Install the mounting screws to the HVAC control assembly. Tighten the screws to 1.9 Nm (17 lb in).
5. Install the radio. Refer to Radio Replacement (See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Radio/Stereo/Service
and Repair/Radio Replacement).
6. Install the mode cable (4) to the mode control cam (2).
7. Install the mode cable (4) to the retaining clip (3).
8. Install the radio. Refer to Radio Replacement (See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Radio/Stereo/Service