Colorado 4WD V8-5.3L (2010)
1. Position the switch to the I/P.
2. Connect the electrical connector to the switch.
3. Install the switch to the I/P.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Install the screw retaining the switch to the I/P.
Tighten the screw to 2.5 Nm (22 lb in).
5. Install the knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement (See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Driver Knee Bolster Panel Replacement).