Colorado 4WD V8-5.3L (2010)
License Plate Lamp: Service and Repair
Rear License Plate Lamp Bulb Replacement
Removal Procedure
1. Ensure the headlamp switch is in the OFF position.
2. Disconnect the electrical connector (2) from the license lamp assembly (1).
3. Remove the nut (3) retaining the license lamp to the bumper.
4. Remove the license lamp assembly from the bumper.
5. Twist the lamp socket counterclockwise to remove.
6. Remove the bulb.
Installation Procedure
1. Install the bulb to the lamp socket.