Colorado 4WD V8-5.3L (2010)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Install the KS (1) and the retaining bolt to the engine block, positioning the electrical terminals rearward.
Tighten the KS bolt to 25 Nm (18 lb ft).
2. Connect the engine wiring harness electrical connector (3) to the KS (1).
3. Install the left wheelhouse liner. Refer to Front Wheelhouse Liner Replacement (See: Body and Frame/Fender/Front Fender/Front Fender
Liner/Service and Repair).
4. Lower the vehicle.
