Colorado 4WD V8-5.3L (2010)
4. Remove the rear seat belt anchor bolt.
5. Remove the bolt that retains the seat belt retractor assembly to the body.
6. Remove the rear seat belt assembly from the vehicle.
Installation Procedure
1. Position the rear seat belt retractor assembly to the vehicle.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the bolt which retains the seat belt retractor assembly to the body.
Tighten the rear seat belt retractor bolt to 52.5 Nm (39 lb ft).
3. Install the rear seat belt upper guide with the bolt. Ensure that the seat belt webbing is not twisted.
Tighten the rear seat belt upper guide bolt to 52.5 Nm (39 lb ft).
