Colorado 4WD V8-5.3L (2010)
Seat Occupant Sensor: Service and Repair
Inflatable Restraint Passenger Presence System Replacement - Front (without AL0)
Inflatable Restraint Passenger Presence System Replacement - Front (without AL0)
Warning
Replace the passenger presence system as a complete assembly to prevent possible injury to the occupant. The bladder, the pressure sensor, the seat
cushion, and the control module are assembled and calibrated as a unit. Using only some of the components in the service kit will cause the passenger
presence system to operate improperly.
Removal Procedure
1. Remove the seat cushion trim cover and pad.
2. Disconnect the electrical connectors.
3. Remove the pressure switch (1) from the bottom of the passenger seat cushion frame.
4. Remove the push-in retainers (1) that hold the bladder to the seat cushion frame.
5. Remove the inflatable restraint passenger presence system from the seat.