Colorado 4WD V8-5.3L (2010)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Loosely install the vertical bolts retaining the transmission support to the frame.
*
Tighten the horizontal nuts to 50 Nm (37 lb ft).
*
Tighten the vertical bolts to 100 Nm (74 lb ft).
4. Lower the transmission.
5. Install the nuts to the transmission mount. Refer to Transmission Mount Replacement (2WD) (See: Transmission and Drivetrain/Manual
Transmission/Transaxle/Transmission Mount/Service and Repair)Transmission Mount Replacement (4WD) (See: Transmission and
Drivetrain/Manual Transmission/Transaxle/Transmission Mount/Service and Repair) in Automatic Transmission - 4L60-E/4L65-E or
Transmission Mount Replacement (RPO Z71) (See: Transmission and Drivetrain/Manual Transmission/Transaxle/Transmission Mount/Service
and Repair)Transmission Mount Replacement (4WD) (See: Transmission and Drivetrain/Manual Transmission/Transaxle/Transmission
Mount/Service and Repair)Transmission Mount Replacement (RPO Z85 and ZQ8) (See: Transmission and Drivetrain/Manual
Transmission/Transaxle/Transmission Mount/Service and Repair) in Manual Transmission - Aisin AR5.
6. Remove the stand or jack.
7. Lower the vehicle.
