Colorado 4WD V8-5.3L (2010)
9. Remove the following parts:
*
The valve bore plug
*
The TCC valve
*
The TCC valve spring(s)
Installation Procedure
Note:
*
Clean and inspect the TCC solenoid O-ring for cuts, nicks, and damage. Replace if necessary.
*
Inspect the TCC bore for sediment and debris. Flush the bore if necessary.
*
Clean and inspect the TCC valve for binding, scoring, and damage.
*
Inspect the TCC spring for cracks and deformed or broken coils.
1. Install the following parts:
*
The TCC valve spring
*
The TCC valve
*
The valve bore plug
2. Install the TCC valve retainer ring (1).
3. Install the TCC control solenoid.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Install the TCC control solenoid retaining bolts and tighten to 8-14 Nm (71-124 lb in).
