Colorado 4WD V8-5.3L (2010)
Seals and Gaskets: Service and Repair
Transmission Housing Oil Seal Replacement - Rear (4WD)
Transmission Housing Oil Seal Replacement - Rear (4WD)
Tools Required
*
J 6125-1B Slide Hammer
*
J 23129 Universal Seal Remover
*
J 45867 4WD Output Shaft Seal Installer
Removal Procedure
1. Remove the transfer case assembly. Refer to Transfer Case Assembly Replacement (See: Transfer Case/Service and Repair/Removal and
Replacement/Transfer Case Assembly Replacement).
2. Using the J 6125-1B (1) and J 23129 (2) remove the rear transmission housing oil seal from the housing.
Installation Procedure