chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Transmission Mount Replacement (RPO Z71)|Page 5565 > < Transmission Mount Replacement (RPO Z71)|Page 5563
Page 2
background image

1. Install the transmission mount to the vehicle.

Caution:  Refer to Fastener Caution   (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).

2. Install the mount to transmission bolts and tighten to 55 Nm (41 lb ft)

3. Lower the transmission and install the two nuts (1) securing the transmission mount to the transmission support. Tighten the nuts to 57 Nm (42 lb

ft).

4. Remove the transmission jack.
5. Lower the vehicle.

Transmission Mount Replacement (RPO Z71)|Page 5565 > < Transmission Mount Replacement (RPO Z71)|Page 5563