chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Recall - Secondary Hood Latch Assembly Adjustment|Page 6897 > < Recall - Secondary Hood Latch Assembly Adjustment
Page 2
background image

OWNER NOTIFICATION

Owners will be notified of this campaign on their vehicles by Chevrolet Motor Division (see copy of owner letter included with this bulletin).
DEALER CAMPAIGN RESPONSIBILITY

Dealers are to service all vehicles subject to this campaign at no charge to owners, regardless of mileage, age of vehicle, or ownership, from this time
forward.

Whenever a vehicle subject to this campaign is taken into your new or used vehicle inventory. or it is in your dealership for service in the future, you
should take the steps necessary to be sure the campaign correction has been made before reselling or releasing the vehicle.

Owners of vehicles recently sold from your new vehicle inventory are to be contacted by the dealer, and arrangements made to make the required
correction according to instructions contained in this bulletin.

Parts, Service Procedure, Campaign Label & Claim Information

PARTS INFORMATION

Parts required to complete this campaign are to be obtained from General Motors Service Parts Operations (GMSPO). To ensure these parts will be
obtained as soon as possible, they should be ordered from GMSPO on a "C.I.O." order with no special instruction code, but on an advise code (2).
It is estimated that 82% of the vehicles involved will require inspection only (no adjustment required), 17% may require secondary latch assembly
adjustment only and less than 1% may require a new secondary latch assembly. Order parts accordingly based on attached involved vehicle listing.

SERVICE PROCEDURE

1.

Visually inspect secondary hood latch assembly. If damaged (bent), install a new secondary latch assembly and adjust for proper operation as
described below.

If secondary latch assembly is not damaged, adjust for proper operation as described below.

Recall - Secondary Hood Latch Assembly Adjustment|Page 6897 > < Recall - Secondary Hood Latch Assembly Adjustment