Corsica L4-134 2.2L (1991)
Seat Belt: All Technical Service Bulletins
Seat Belts, Front - Guide Loop Covers Broken/Missing
Number: 93-216-10
Section: 10
Date: MAY 1993
Corporate Bulletin No.: 331026
ASE No.: B1
Subject:
INFORMATION ON REPLACEMENT OF GUIDE LOOP COVERS ON FRONT SEAT BELTS
Model and Year:
1991-93 CORSICA AND BERETTA
If one of the guide loop covers on the front seat belts of some 1991-93 "L" cars becomes broken or is found to be missing, a replacement guide loop
cover is available separate from the seat belt assembly itself. The seat belt assembly DOES NOT need to be replaced when there is a problem with the
guide loop cover.
1.
Remove bolt holding the guide loop to the pillar using J23457 - seat belt anchor tool.
2.
Remove the guide loop cover from the guide loop.
3.
Install new guide loop cover.
4.
Install bolt to pillar, tighten to 42 N-m (31 lbs.ft.) using J23457 - seat belt anchor tool, and snap new guide loop cover into place over the guide
loop and anchor bolt.
Parts are currently available from GMSPO.
Labor Operation Number:
Right - C9050
Left - C9051
Use applicable labor time guide for labor hours.