Corsica L4-2.2L VIN 4 (1995)
Coolant: Technical Service Bulletins
Cooling System - Filling Procedure
File In Section: 6 - Engine
Bulletin No.: 63-62-02
Date: February, 1996
SERVICE MANUAL UPDATE
Subject:
Section 6B - Additional Information to Step 3 of "Filling The Cooling System" Procedure
Models:
1995 Chevrolet Beretta, Corsica
with 2.2L Engine (VIN 4 - RPO LN2)
Please add the following information to Step 3 of the "Filling" procedure found on page 6B-10 of the Service Manual:
Important:
On vehicles produced with the 2.2L engine, loosen the engine coolant air bleed screw located on the top side of the engine coolant outlet. Add
coolant until all air is evacuated through air bleed. Tighten air bleed screw. Refer to Figure 13 on page 6B-12 for coolant bleed location.