chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Disabling the SIR System|Page 8339 > < Service Port HVAC|Locations
Page 1
background image

Air Bag(s) Arming and Disarming: Service and Repair
Disabling the SIR System

 WARNING: The diagnostic energy reserve module or sensing and diagnostic module (DERM/SDM) can maintain enough voltage to cause
air bag deployment for up to two minutes after the ignition switch is turned off and the battery is disconnected. Servicing the SIR system
during this period may result in accidental deployment and personal injury.

1. Ensure front wheels are pointed straight ahead.
2. Turn ignition switch to LOCK position.
3. Remove SIR or AIR BAG fuse (fuse No. 3 on 1995-96 models).
4. Remove left sound insulator. If necessary, remove courtesy lamp from sound insulator.
5. Disconnect Connector Position Assurance (CPA) and yellow 2-way connector at base of steering column.
6. Wait at least 2 minutes before proceeding with diagnosis or service.

Disabling the SIR System|Page 8339 > < Service Port HVAC|Locations