Corsica V6-173 2.8L (1987)
Front Fender Liner: All Technical Service Bulletins
Front Wheelhouse Panel - Wavy/Poor Appearance
Number:
87-174
Section:
10
Date:
JULY, 1987
Subject: FRONT WHEELHOUSE PANEL APPEARANCE
Model and Year: 1987 CORSICA
TO:
ALL CHEVROLET DEALERS
Customer comments that the wheelhouse liner panel is wavy or has a poor appearance can be repaired by installing a second generation wheelhouse
liner. Vehicles assembled prior to the following breakpoints had first generation wheelhouse liners, some of which may be wavy:
Plant
VIN Breakpoints
Wilmington
100648
Linden
104615
Second generation wheelhouse liners are installed at the top side of the fender flange rather than at the bottom side. The part numbers for the second
generation liner are:
Part Numbers
10082239
Left Side
10082240
Right Side
Service Procedure
1.
Remove original wheelhouse panel and discard.
2.
Enlarge the holes where plastic fasteners were used to 17/64" diameter. Prime the drilled holes in the sheet steel with chromate primer. (Plastic
fascia does not need to be primed.)
