chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Brake Caliper|Specifications > < Brakes (Front) - Caliper Not Sliding Freely, Corrosion
Page 1
background image

Brake Caliper: All Technical Service Bulletins
Suspension, Front - Loose Lumber Noise

Number:

90-204-3C

Section:

3C

Date:

April 1990

Corporate Bulletin No.: 075001
Subject:

FRONT SUSPENSION LOOSE LUMBER NOISE

Model and Year:

1990 J, L CARS

TO:

ALL CHEVROLET DEALERS

Customers may comment about a "loose lumber" noise from the front of their vehicle, especially while travelling over rough roads at low speed.
Application of the brake will eliminate the noise.

This condition may be corrected by installing new caliper mounting bolt assemblies, P/N 18017373, following the procedures in section 5B-2 of the
Service Manual. These new bolt assemblies have a larger outside diameter sleeve.

Parts are currently available from GMSPO.

WARRANTY INFORMATION

Labor Operation Number:

T4664

Labor Time:

0.5 Hours

Trouble Code:

92

Brake Caliper|Specifications > < Brakes (Front) - Caliper Not Sliding Freely, Corrosion