Corsica V6-191 3.1L (1990)
10. Install starter and torque mounting bolts to 43 Nm ( 32 ft. lb. )
11. Install flywheel cover on transaxle.
12. Install inner splash shield.
13. Lower vehicle install radiator hose at coolant pump.
14. Install bypass pipe at front cover.
15. Install EVAP canister purge hose.
16. Install plug wire shield at coolant pump.
17. Install coolant pump pulley and torque mounting bolts to 21 Nm ( 15 ft. lb. )
18. Install power steering pump and torque pump to bracket bolts to 30 Nm ( 22 ft. lb. ).
19. Install generator.
^
Torque generator brace bolt ( to generator ) and generator upper attaching bolt to 25 Nm ( 18 ft. lb. )
^
Torque generator brace bolt ( to engine ) and generator lower attaching bolt to 47 Nm ( 35 ft. lb. )
20. Install tensioner and torque bolt to 54 Nm (40 lb. ft.).
21. Install engine coolant.
22. Connect negative battery cable and tighten bolt to 15 Nm (11 lb. ft.).
23. Inspect for proper fluid levels, leaks, and completion of repair.
