chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

All Other Service Bulletins for Valve Body: > < Pedals - Buzz At Light Throttle
Page 1
background image

Valve Body: All Technical Service Bulletins
Pedals - Buzz on Light Throttle Application

Number:

91-61-7A

Section:

7A

Date:

August 1990

Corp. Bulletin No.:  077126
Subject:

PEDAL BUZZ AT ZERO TO LIGHT THROTTLE IN FORWARD GEAR RANGES

Model and Year:

1990-91 CAVALIER, CORSICA, BERETTA WITH 3.1L (VIN CODE T) ENGINE

TO:

ALL CHEVROLET DEALERS

BULLETIN COVERS:

A new Spacer Plate (20 with a smaller 1-2 accumulator orifice which will reduce the potential for pedal buzz. This pedal buzz is noticeable at zero to
light throttle in forward gear ranges caused by unstable operation of the 1-2 accumulator valve.

DATE OF PRODUCTION CHANGE:

This new Spacer Plate will go into production in all "K" and "U" model HYDRA-MATIC 3T40 transaxles on July 30, 1990 (Julian Date 211).

SERVICE PROCEDURE:

To service any HYDRA-MATIC 3T40 for a pedal buzz condition, replace the (existing) spacer plate with a new spacer plate which contains the smaller
1-2 accumulator orifice.

SERVICE PARTS INFORMATION:

Refer to the following part numbers whenever ordering this new spacer plate.
Parts are currently available from GMSPO.

SERVICE MANUAL REFERENCE:

Whenever service to the Spacer Plate or valve body assembly is necessary, refer to the HYDRA-MATIC 3T40 Unit Repair Section of your service
manual.

All Other Service Bulletins for Valve Body: > < Pedals - Buzz At Light Throttle