Corsica V6-3100 3.1L MFI VIN M (1994)
Place two pieces of butyl between the instrument panel and defroster grille, one on each side of the air vent as indicated in Figure 1.
Left Side: Place butyl 15 mm (19/32") right of the VIN plate and 10 mm (13/32") rearward of the windshield.
Right Side: Place butyl 70 mm (2 3/4") right of the inboard retaining clip and 10 mm (13/32") rearward of the windshield.
Procedure
1.
Remove defroster grille with a blunt tool to eliminate damage to the instrument panel (begin removal from the right side of the instrument panel).
2.
Install butyl (refer to Figure 1 and above text for proper positioning).
3.
Install defroster grille (begin installation from the left side of the instrument panel).
Important:
When removing a defroster grille with butyl in place, take care not to get the butyl on the instrument panel topper pad.
Parts Information
P/N
Description
22653673
Insulator, Instrument Panel Trim Pad (Butyl)
Parts are currently available from GMSPO.