Corsica V6-3100 3.1L MFI VIN M (1994)
Case: Service and Repair
Case Side Cover and Gaskets
CASE SIDE COVER AND GASKETS
TOOL REQUIRED:
^
J 28467-A Engine Support Fixture
REMOVE OR DISCONNECT
1. Negative battery cable.
2. Park/neutral position switch.
3. Install engine support fixture, J 28467-A.
4. Raise and support vehicle.
5. Left tire and wheel assembly.
6. Left side splash shield.
7. Left side ABS wheel speed sensor connector and harness from suspension support.
8. Left side ball joint.
9. Left side stabilizer bar link pin.
10. Left side suspension support.
11. Left side drive axle from transaxle.
12. Transaxle mount to body bolts. Refer to "Transaxle Mount".
13. Transaxle mount to transaxle bolts. Refer to "Transaxle Mount".
14. Transaxle oil cooler lines at transaxle.
15. Side cover bolts.
16. Case side cover.
CLEAN
^
Case and side cover gasket surfaces.
INSTALL OR CONNECT
1. New gaskets on case.
2. Side cover and new bolts.
TIGHTEN
