chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Control Assembly, HVAC > < Conventional Mounted|Page 7090
Page 1
background image

Condenser HVAC: Service and Repair

Condenser

REMOVE OR DISCONNECT

1. Disable the Supplemental Inflatable Restraint (SIR) system, refer to Disabling the Supplemental Inflatable Restraint (SIR) System.  See: Body and

Frame/Interior Moulding / Trim/Dash Board / Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair

2. Recover refrigerant from A/C system.
3. Radiator air upper baffle.
4. Engine cooling fan.
5. Forward discriminating sensor.
6. Receiver Dehydrator (R/D) tube from condenser outlet.
7. A/C compressor and condenser hose from condenser inlet.
8. Screws attaching condenser to radiator.
9. Bolts from upper radiator mounting brackets.

10. Pull windshield washer bottle filler neck from windshield washer bottle.
11. Condenser from vehicle by tipping radiator toward engine.

NOTICE: If replacing condenser, refer to Refrigerant Oil Distribution.  See: Specifications

INSTALL OR CONNECT

1. Condenser into position by tipping radiator toward engine.
2. Filler neck to windshield washer bottle.
3. Radiator upper mounting brackets and bolts.
4. Screws attaching condenser to radiator.
5. A/C compressor and condenser hose to condenser inlet.
6. R/D tube to condenser outlet.
7. Forward discriminating sensor.
8. Engine cooling fan.
9. Radiator air upper baffle.

10. Enable the SIR system, refer to Enabling the Supplemental Inflatable Restraint SIR System.  See: Body and Frame/Interior Moulding / Trim/Dash

Board / Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair

11. Evacuate, charge and leak test A/C system.

Control Assembly, HVAC > < Conventional Mounted|Page 7090