chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Neutral Safety Switch > < Wheel Sensor|Page 6180

Corsica V6-3100 3.1L VIN M SFI (1996)

  • Starting and Charging
  • Sensors and Switches - Starting and Charging
  • Clutch Start Switch <--> [Clutch Switch]
  • Component Information
  • Service and Repair

Page 1
background image

Clutch Start Switch: Service and Repair

1. Disconnect battery ground cable.
2. Disconnect wiring connector from switch located on clutch pedal support above clutch pedal.
3. Disconnect switch link from pedal, then remove switch retaining link and switch.
4. Reverse procedure to install.

  • Starting and Charging
  • Sensors and Switches - Starting and Charging
  • Clutch Start Switch <--> [Clutch Switch]
  • Component Information
  • Service and Repair

Neutral Safety Switch > < Wheel Sensor|Page 6180