Corsica V6-3100 3.1L VIN M SFI (1996)
Figures 1 and 2
1.
Depress and hold the re-adjustment tab.
2.
Pull the cable conduit out until the slider mechanism hits the stop.
3.
Release the button.
4.
Position the 17 mm socket with torque wrench onto the throttle body pulley cam assembly.
5.
Rotate the torque wrench to the full wide open throttle (WOT) position and apply 7.0 - 10.0 N.m (62 - 69 in. lb).
Important:
Audible clicks will occur during this step.
6.
Release the applied pressure on the torque wrench.
7.
Remove the torque wrench and socket.