Corvette V8-350 5.7L (1982)
Applying RTV Sealant To Boot Retaining Ring
Boot Retainer Ring-to-Housing Seal
8. Depress pistons and while holding in a depressed position place a bead of silastic sealant GM 1052366 or equivalent on outer diameter of the boot
retaining ring forming a seal between the boot retainer ring and the housing.
9. Position the "O" rings in the small cavities around the brake fluid transfer hole in both ends of the outboard caliper halves. Lubricate the hex head
bolts with Delco Brake Lube (or equivalent) or dip in clean brake fluid. Fit caliper halves together and secure with bolts.
