Corvette V8-350 5.7L (1982)
6. Place the inner bearing cone and roller assembly in the hub. Then using your finger, put an additional quantity of grease outboard of the bearing.
7. Install a new grease seal using a flat plate until the seal is flush with the hub. Lubricate the seal lip with a thin layer of grease.
8. Carefully install the hub and rotor assembly. Place the outer bearing cone and roller assembly in the outer bearing cup. Install the washer and nut
and initially tighten the nut to 12 ft. lbs. while turning the wheel assembly forward by hand.. Put an additional quantity of grease outboard the
bearing. This provides extra grease availability to the bearing.
9. Adjust wheel bearings as outlined under WHEEL BEARING ADJUSTMENT.
10. Position caliper, install and tighten two caliper mounting bolts to specifications.
11. Install dust cap on hub.
12. Install wheel and tighten nuts to specifications. Install hub cap or wheel disc.
13. Lower vehicle to floor.
