chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

All Other Service Bulletins for Governor: > < A/T - 4L60/700-R4 Transmissions Stuck In First|Page 2835
Page 1
background image

Throttle Body Gasket: All Technical Service Bulletins
Engine - High/Rough or Unstable Idle

Number:

84-30

Section:

6 (VI)

Date:

Dec., 1983

Subject:

HIGH, ROUGH, OR UNSTABLE IDLE ON 5.0L AND 5.7L ENGINES

Model and Year:1982-83 CAMARO, 1982-84 CORVETTE

TO:

ALL CHEVROLET DEALERS

High, rough, or unstable idle condition may be caused by vacuum leaks by the TBI cover plate to inlet gasket area on Camaro and
Corvette crossfire injection engines.

When this occurs, check the entire area of the TBI cover plate gasket for vacuum leaks.

If leaks are detected, remove the cover plate and gasket, replace the gasket (P/N 14044605), reinstall the cover plate, finger start the
attaching bolts and studs and tighten to 20-34 N-m (15-25 ft.lbs.).

All Other Service Bulletins for Governor: > < A/T - 4L60/700-R4 Transmissions Stuck In First|Page 2835