Corvette V8-5.7L VIN G (1997)
Coaxial Cable Replacement (Radio Control): Installation Procedure
1. Install the radio control coaxial cable into position.
2. Tape the radio control coaxial cable to the I/P wiring harness along the I/P lower support beam.
3. Connect the radio control coaxial cable to the radio control.
Coaxial Cable Replacement (Radio Control): Installation Procedure
4. Align the radio control locator tab to the I/P center support bracket locator hole.
5. Install the radio control.
Coaxial Cable Replacement (Radio Control): Installation Procedure
6. Install the radio control retaining screws.
Tighten
Tighten the radio control retaining screws to 2.5 N.m (22 lb in).
NOTE: Refer to Fastener Notice in General Information.
