Corvette V8-5.7L VIN G (1997)
Keyless Entry Transmitter: Service and Repair
Transmitter Battery Replacement
Transmitter Battery Replacement: Removal Procedure
REMOVAL PROCEDURE
1. Place the transmitter face down on a clean surface.
2. Insert a small screwdriver into the slot on the side of the transmitter.
3. Carefully turn the screwdriver in the slot until the cover releases.
4. Remove the cover while being careful not to damage the seal.
5. Remove the battery from the transmitter.
Transmitter Battery Replacement: Installation Procedure
INSTALLATION PROCEDURE
1. Install the new battery with the positive (+) side facing up.
2. Inspect that the seal is properly positioned.
3. Snap the two halves together.
4. Synchronize the transmitter to the receiver. Refer to Transmitter Programming/Synchronization. See: Service and Repair