Corvette V8-5.7L VIN G (1997)
3. Disconnect the front windshield antenna coaxial cable from the antenna module.
4. Release the coaxial cable from the body retaining clips.
5. Remove the coaxial cable push-in retainers from the floor panel support.
6. Separate the front windshield antenna coaxial cable from the radio control coaxial cable.
Coaxial Cable Replacement (Windshield Antenna): Removal Procedure
7. Remove the LH I/P lower insulator panel.
8. Remove the coaxial cable from the insulation tape along the hinge pillar
Coaxial Cable Replacement (Windshield Antenna): Removal Procedure
9. Remove the windshield side garnish moldings.
10. Remove the sunshades.
11. Remove the windshield upper garnish molding.
12. Disconnect the coaxial cable from the front windshield antenna connector.
13. Remove the bolt retaining the coaxial cable ground wire to the windshield frame.
