Corvette V8-5.7L VIN G (1997)
15. Disconnect the radio control coaxial cable from the antenna module.
16. Release the coaxial cable from the body retaining clips.
17. Remove the coaxial cable push-in retainers from the floor panel support.
18. Separate the radio control coaxial cable from the front windshield antenna coaxial cable.
19. Remove the radio control coaxial cable.
INSTALLATION PROCEDURE
Coaxial Cable Replacement (Radio Control): Installation Procedure
1. Install the radio control coaxial cable into position.
2. Tape the radio control coaxial cable to the I/P wiring harness along the I/P lower support beam.
3. Connect the radio control coaxial cable to the radio control.
Coaxial Cable Replacement (Radio Control): Installation Procedure
4. Align the radio control locator tab to the I/P center support bracket locator hole.
5. Install the radio control.
