Corvette V8-5.7L VIN G (1997)
3. Raise the vehicle and suitably support.
4. Connect the fascia harness connector.
Front Fascia Replacement: Installation Procedure
5. Align the fascia to the fenders at the headlamp opening and flush the fender to the vertical joint.
6. Install the nuts attaching the fascia to the forward studs on the right and left fender reinforcements.
Tighten
Tighten the fascia to the fender reinforcement stud nuts to 7 N.m (62 lb in).
NOTE: Refer to Fastener Notice in General Information.
7. Align and flush the fascia to the fender at the horizontal joint.
8. Install the nuts attaching the fascia to the rearward studs on the right and left front fender reinforcement.
Tighten
Tighten the fascia to the fender reinforcement stud nuts to 7 N.m (62 lb in).
Front Fascia Replacement: Installation Procedure
9. Install the bolts attaching the wheelhouse to the fascia.
Tighten
Tighten the front wheelhouse to fascia bolts to 5 N.m (44 lb in).
