Corvette V8-5.7L VIN G (1997)
Tighten the front fascia lower flange to the radiator support screws to 8 N.m (71 lb in).
Front Fascia Replacement: Installation Procedure
13. Install the bolts attaching the fascia to the skid bar bracket.
Tighten
Tighten the fascia to the skid bar bracket bolts to 5 N.m (44 lb in).
Front Fascia Replacement: Installation Procedure
IMPORTANT: Use only the exact size square headed tool when removing or installing the plastic headed screws to avoid striping the plastic
screw heads.
14. Install the plastic headed screws attaching the license plate opening to the absorber.
Tighten
Tighten the license plate opening to absorber screws to 1 N.m (9 lb in).
Front Fascia Replacement: Installation Procedure
15. Install the license plate or insert.
15.1.
Insert the insert upper tabs into slots in the fascia.
15.2.
Secure the insert or plate with screws.
