Corvette V8-5.7L VIN G (1997)
Rear Bumper Cover / Fascia: Service and Repair
License Bracket
Rear License Bracket Replacement: Removal Procedure
REMOVAL PROCEDURE
1. Remove the license plate.
2. Remove the license bracket screws and bracket.
Rear Replacement Bracket Replacement (Export Only): Installation Procedure
INSTALLATION PROCEDURE
1. Align the license bracket with the center locating tab in the slot in the fascia.
2. Install the license bracket attaching screws.
Tighten
Tighten the license bracket screws to 2 N.m (18 lb in).
3. Install the license plate.