Corvette V8-5.7L VIN G (1997)
1.
Verify the leak by flooding the hinge area. Refer to the arrow in the illustration.
2.
Clean the area with one of the cleaners listed.
3.
Reseal the area with the Kent(TM) sealer listed.
Condition 4
Water is running down the front edge of the door or water is on top of the sill plate.
Cause
The butyl strip under the seal at the base of the "A" pillar may not be sealing properly or the push-in fastener may not be seated.
Correction
Clean the area with one of the cleaners listed. Reseal the "A" pillar starting at the bottom of the weatherstrip retainer with the GM sealer listed. Refer to
the dotted line in the illustration for sealing.
Condition 5
Water is running down the front edge of the door or water is on top of the sill plate.
Cause