Corvette V8-5.7L VIN G (1997)
Seat Bladder: Service and Repair
REMOVAL PROCEDURE
Lumbar Bladder Replacement: Removal Procedure
1. Remove the seat.
Lumbar Bladder Replacement: Removal Procedure
2. Remove the seat cushion cover.
3. Remove the seatback insert pillow.
4. Disconnect the bladder hose connector from the pump.
5. Remove the bladders.
5.1.
Slide the upper bladder slightly up.
5.2.
Tuck the mounting tab under the bladder sleeve.
5.3.
Slide the bladder down over the tab.
5.4.
Repeat this procedure with the lower bladder.
6. Slide the air hoses from under the seatback cover.
Remove the bladders with hoses.
INSTALLATION PROCEDURE
