Corvette V8-5.7L VIN G (1997)
3.
Position the seatback cover over the seatback frame.
4.
Pull firmly down on the seatback cover.
5.
Attach the seatback cover with the fir tree fasteners using one of the following methods:
^
Slide each of the seatback cover tabs over the 19 mm (0.75 in) head of a lower fir tree fastener and push the fastener in to secure.
^
Install new fir tree fasteners through the seatback cover and the lumbar bladder assembly into the seatback frame.
6. Zip the upper zipper closed.
7.
Tuck the zipper ends out of sight into the seat trim.
8.
Pull the back of the seatback cover down firmly.
9.
Tuck the lower corners of the seatback cover over the foam.
10.
Carefully tuck the seatback cover behind the release lever bezel.
11.
Install the insert pillow. Refer to Seat Back Trim Replacement - Front (sport Seat Insert Pillow).
