Corvette V8-5.7L VIN G (1997)
Seat Cover: All Technical Service Bulletins
Seatback Cover - Revised Removal Procedure
File In Section: 08 - Body and Accessories
Bulletin No.: 99-08-50-002
Date: March, 1999
SERVICE MANUAL UPDATE
Subject:
Revised Seatback Cover Removal Procedure
Models:
1997-99 Chevrolet Corvette
This bulletin is being issued to revise the seatback cover and pad replacement procedures in the Seat sub-section of Body & Accessories in the Service
Manual.
Please use the following to replace the existing information in the Service Manual.
Seatback Cover and Pad Replacement - Base Seat
Removal Procedure
5.
Carefully slide and pull the cover material out from under the seatback release lever bezel.
6.
Remove the cover unhooking the hook and loop fasteners from the foam pad.
7.
Remove the upper fasteners attaching the foam pad (if removing the pad).
8.
Remove the foam pad (if necessary).