Corvette V8-5.7L VIN G (1997)
Power Door Lock Switch: Service and Repair
Power Door Lock Switch Replacement: Removal Procedure
REMOVAL PROCEDURE
IMPORTANT: Protect the trim panel with a rag when prying up the switch to prevent marring the trim panel.
1. Pry up the rear edge of the drivers side switch assembly, or the front edge of the passenger side switch assembly.
2. Slide the drivers side switch assembly rearward, or the passenger side switch assembly forward, out of the door trim panel.
3. Disconnect the electrical connector.
Power Door Lock Switch Replacement: Installation Procedure
INSTALLATION PROCEDURE
1. Connect the electrical connector to the switch.
2. Insert the front edge of the drivers side switch, the rear edge of the passenger side switch, into the door trim panel.
3. Press the rear edge of the drivers side switch, the front edge of the passenger side switch, into the trim panel to secure.