Corvette V8-5.7L VIN G (1997)
Re-seal the weatherstrip with the GM sealer listed. Refer to the dotted line in the illustration for sealing area.
Condition 7
There may be a leak around the perimeter of the hard top causing water to drip from the garnish molding into the rear compartment.
Cause
There may be a void in the sealer between the body and the hard top.
Correction
Clean the area with one of the cleaners listed and seal the area shown in the illustration with the Kent(TM) sealer listed.
Condition 8
The floor is wet behind the seat belts (Hardtop/ Z06 only).
Cause
