Corvette V8-5.7L VIN G (1997)
Brake Hose/Line: Service and Repair
Front Brake Hose
REMOVAL PROCEDURE
1. Clean dirt and foreign material from the brake hoses and fittings.
2. Raise the vehicle and support.
3. Remove the tire and wheel assembly.
4. Remove the brake pipe or crossover pipe from the brake hose.
5. Remove the retainer from the brake hose at the bracket.
6. Remove the brake hose from the bracket.
7. Remove the brake caliper inlet fitting bolt, brake hose and two aluminum gaskets from the brake caliper.
8. Discard the aluminum gaskets.
