Corvette V8-5.7L VIN G (1997)
3. Install a new center heater core seal on the heater/evaporator module.
4. Install a new lower heater core seal on the heater/evaporator module.
5. Install the heater core into the heater/evaporator module.
6. Install a new outer heater core seal (3).
7. Install the heater core pipe screw (2).
8. Install the heater core mounting clip screw (3).
-
Tighten the heater core pipe screw to 1.6 Nm (14 lb. in).
-
Tighten the heater core mounting clip screw to 1.6 Nm (14 lb. in).
NOTICE: Refer to Fastener Notice in Service Precautions.